The in duct air purifier has been designed to make it easy to provide an odor and germ free environment in your home or at your commercial premises.You simply attach the unit into your return plenum and turn on the power to kill odors, bacteria and mold found in your air ducts.Alternatively, you can get your air conditioning professional to install the unit for you.
This unique bulb is 85% germicidal and 15% activated oxygen – this combination delivers purification and odor control for an area up to 2,300 square feet.It is easy to operate, simple to install and virtually maintenance free.
Specifications
·Power:120V AC
·Activated oxygen output:up to 35 mg/hr
·Bulb rated at 9,000 running hours
·Dimensions:bulb (L) 14”; mounting disk (circumference) 4"; full length 16”
·Weight:1.4 lb
Safety information
·Do not look at the bulb with the naked eye.
·Do not touch the bulb during installation
Parts list
The shipped unit is ready to install and includes:
·(1) 14” bulb
·(1) 4” mounting disk
·(1) ¾” nut
·(1) 12 foot long power cord
·(4) 10x½” sheet metal screws
·(1) 120V AC rapid start electronic ballast Warranty
One year
Installation instructions
1.Find the appropriate power connection for
the ID-135, 120V AC.Your connection options
include:
−Bring power from a wall outlet
−Bring power from the HVAC unit
−Bring power from the HVAC unit fan
2.Using a 1⅜ - 1½” hole saw, drill a hole on
the return side plenum making sure you have
the appropriate clearance for the bulb inside
the plenum.
3.Place the ID-135 into the plenum, hold it in
place and mount with the self tapping screws.
4.Attach the ballast of the ID-135 to the plenum
using self tapping screws.
5.Bring power to the ID-135 in duct unit.
Bulb replacement
1.Loosen the ¾” nut on the mounting plate and pull the bulb from the fitting.
2.Pull the old bulb from the electrical connector.Push the new bulb into the electrical connector.
3.Push the bulb and connector through the hole in the mounting plate and tighten the ¾” nut.
